|
|
|
Discussion Forums
Forum Index
> Rifles general discussion
> 280 AI - Reloading Die Question
280 AI - Reloading Die Question
@ 11:25 am (GMT) |
Lane SalvatoFor those of you who shoot the 280 AI I have a question. I have a new one, and wonder what dies you use? I love Lee dies because I've had zero problems with runout with my 308. That said, I don't believe that Lee makes the SAAMI specification dies.My gunsmith recommended Redding full length dies or a bushing die specific to my chamber. So what is your experience with 280 AI dies. Thank you in advance. |
Replies
@ 09:28 pm (GMT) |
Chris MurphyRe: 280 AI - Reloading Die QuestionI simply use lee 280 neck die and seating die |
|
@ 07:11 am (GMT) |
Lane SalvatoRe: 280 AI - Reloading Die QuestionChris, thanks. Is your 280 AI a SAAMI chamber? |
@ 09:30 am (GMT) |
VinceRe: 280 AI - Reloading Die QuestionHi LaneI usually use Lee dies too but couldn't find one in NZ with the SAAMI spec 280AI at the time I was looking so I got a Hornady die instead, no complaints it has worked fine for me. Cheers Vince |
|
@ 09:41 pm (GMT) |
Chris MurphyRe: 280 AI - Reloading Die QuestionLane this one is cut from one of the first foster/Manson reamers (only slightly lead geometry changed from this one) so will be within sammi spec |
Please wait
ABOUT USWe are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.
|
KNOWLEDGEBASE |
KNOWLEDGEBASE |