Discussion Forums

Craig Henard

Hi Nathan I see in one of your books that you talk about having a GALVANIC reaction between the stainless action and the aluminum lug.

I am going to put a light coat of grease on the bottom of the action but not quit sure how to address the lug issue.
The lug stayed in the action when I took the stock off.

Do I just rub a light coat on the part of the lug that contacts the slot in the stainless reciever? front, back ,sides and top of lug?

OR do I need to also put some in the slot that accepts the recoil lug as well ?(Perhaps using a Q tip ?)

Thanks
Craig