|
|
|
Discussion Forums
Forum Index
> Precision long range hunting and shooting
> Barrel brake in
Barrel brake in
@ 09:15 pm (GMT) |
TONY. POTTERHi all. After reading the procedure in the book series I have a question. Can you use hand loads using trailboss powder for this or is it better to use full power loads. Cal is 7mm rem mag. Cheers. |
Replies
@ 06:28 am (GMT) |
Nathan FosterRe: Barrel brake inHi Tony, you can start this way but it can be a bit slower. It is the sort of thing where you will not know for sure (whether the throat reaming burrs have smoothed out) until you run relatively high power loads. With a new barrel, it can be easier to work with high power loads (book mid point) or factory ammo as a means to source brass. |
|
@ 07:19 am (GMT) |
Tony PotterRe: Barrel brake inGood morning Nathan. Thanks for the reply will go with full power hand loads mid load manual range. Mate already has brass and powder. CHEERS |
Please wait
ABOUT USWe are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.
|
KNOWLEDGEBASE |
KNOWLEDGEBASE |